warp-ozbridge

@sena-labs/oz-mcp-server

Standalone Model Context Protocol server for Warp™ Oz™ agents — no VS Code required. Run it from a terminal and drive Oz from Claude Code, Cursor, Codex, or any MCP client.

OzBridge is an independent project and is not affiliated with, endorsed by, or sponsored by Warp. "Warp" and "Oz" are trademarks of Warp, Inc., used here nominatively — solely to describe interoperability. See Trademarks & disclaimer below.

This package is the VS Code‑free sibling of the OzBridge extension. It exposes the same MCP tool surface (six tools: oz_agent_run, oz_run_list, …) over stdio or Streamable HTTP, so any MCP client can launch and inspect Oz runs.

---

Requirements

• Node.js ≥ 22.12
• The Oz CLI installed and on your PATH (or pointed at via OZ_PATH). Download Warp from https://www.warp.dev/download — the oz command ships with it (on Linux typically ~/.warp/bin/oz). Verify with oz --version.
• Signed in to Warp: run oz login once in a terminal.

The server only ever shells out to the documented oz CLI; it does not embed, modify, or reverse‑engineer any Warp software.

---

Quick start (stdio — recommended)

Let your MCP client spawn the server over stdio — no install step, no port, no token, and no terminal to keep open.

Claude Code:

claude mcp add oz -- npx -y @sena-labs/oz-mcp-server --stdio

Codex CLI — add to ~/.codex/config.toml:

[mcp_servers.oz]
command = "npx"
args = ["-y", "@sena-labs/oz-mcp-server", "--stdio"]

Cursor / Windsurf / Claude Desktop — add to ~/.cursor/mcp.json (Cursor), ~/.codeium/windsurf/mcp_config.json (Windsurf) or claude_desktop_config.json (Claude Desktop):

{
  "mcpServers": {
    "oz": {
      "command": "npx",
      "args": ["-y", "@sena-labs/oz-mcp-server", "--stdio"]
    }
  }
}

HTTP mode

To run a long-lived server that clients reach by URL instead:

npx -y @sena-labs/oz-mcp-server

It binds to 127.0.0.1:3847. Leave it running, then point your MCP client at the Streamable HTTP endpoint http://127.0.0.1:3847/mcp — see MCP client setup (HTTP). The legacy HTTP+SSE endpoint /sse is still served but deprecated.

Pin a port and a bearer token instead of the defaults:

npx -y @sena-labs/oz-mcp-server --port 3847 --token my-secret

Install it globally if you'd rather not re‑download on each run:

npm install -g @sena-labs/oz-mcp-server
oz-mcp-server --help

---

Configuration

Settings resolve in this order (highest precedence first):

1. CLI flags
2. Environment variables
3. ./.warp/warp-bridge.yaml (current working directory), then ~/.warp/warp-bridge.yaml
4. Compiled‑in defaults

CLI flags

Flag	Default	Purpose
--port <n>	3847	TCP port to listen on. 0 lets the OS pick an ephemeral port.
--bind <addr>	127.0.0.1	Interface to bind. Non‑loopback requires a token (see Security).
--token <s>	(none)	Bearer token required on every request. Empty = no auth.
--cwd <dir>	process.cwd()	Workspace root for .warp/warp-bridge.yaml discovery.
--help, -h	—	Print usage and exit.

Environment variables

Variable	Maps to	Default	Purpose
OZ_PATH	ozPath	oz	Path to the Oz CLI binary. Bare oz resolves from PATH.
OZ_MCP_PORT	port	3847	Listening port. 0 = OS‑assigned ephemeral port.
OZ_MCP_BIND	bind address	127.0.0.1	Interface to bind (loopback only by default).
OZ_MCP_TOKEN	bearer token	(empty)	Bearer token required on every request. Empty disables auth.
OZ_DEFAULT_MODEL	defaultModel	auto	Default AI model for runs.
OZ_DEFAULT_PROFILE	defaultProfile	Default	Default Oz agent profile.
OZ_DEFAULT_ENV	defaultEnvironment	(empty)	Default cloud environment id.
OZ_TIMEOUT_MS	local run timeout	300000	Hard timeout for local runs (ms).
OZ_IDLE_TIMEOUT_MS	idle timeout	90000	Abort a run after this long with no CLI output (ms). 0 disables.

OZ_PATH=/usr/local/bin/oz \
OZ_MCP_PORT=3847 \
OZ_MCP_TOKEN=my-secret \
npx -y @sena-labs/oz-mcp-server

On Windows PowerShell, set variables with $env: first:

$env:OZ_MCP_TOKEN = "my-secret"; npx -y @sena-labs/oz-mcp-server

---

Transports

The server speaks MCP over two transports:

• stdio (--stdio) — the host spawns the server as a child process and exchanges JSON-RPC over stdin/stdout. Recommended for Claude Code, Codex, Cursor, Windsurf, Claude Desktop, mcp-proxy, and registry sandboxes (e.g. Glama). No port, no token. See Quick start.
• Streamable HTTP (default when --stdio is not passed) — the server listens on a port and clients connect by URL to /mcp. The older HTTP + SSE transport (/sse + /messages) is still served for legacy clients but is deprecated.

# stdio (spawned by the host)
npx -y @sena-labs/oz-mcp-server --stdio

# HTTP (default) — endpoint http://127.0.0.1:3847/mcp
npx -y @sena-labs/oz-mcp-server --port 3847

MCP client setup (HTTP)

For URL-based clients, start the server in HTTP mode (above), then add the endpoint to your client. These snippets mirror docs/MCP.md.

Claude Code

claude mcp add --transport http oz http://127.0.0.1:3847/mcp

Cursor / Windsurf

Add to ~/.cursor/mcp.json (or ~/.codeium/windsurf/mcp_config.json):

{
  "mcpServers": {
    "oz": {
      "url": "http://127.0.0.1:3847/mcp"
    }
  }
}

Codex CLI

Add to ~/.codex/config.toml:

[mcp_servers.oz]
url = "http://127.0.0.1:3847/mcp"

If you set a token

With --token / OZ_MCP_TOKEN, every request needs an Authorization: Bearer <token> header:

• Claude Code: append --header "Authorization: Bearer <token>" to claude mcp add.
• Cursor / Windsurf: add "headers": { "Authorization": "Bearer <token>" } next to "url".
• Codex: add http_headers = { "Authorization" = "Bearer <token>" } under [mcp_servers.oz].

---

Tools exposed

Tool	Purpose
oz_agent_run	Run oz agent run locally with a prompt. Returns the full run payload.
oz_agent_run_cloud	Launch a cloud run. Consumes Warp credits.
oz_run_get	Fetch a run's status and output by id. Read‑only.
oz_run_list	List recent runs; filter by all / active / completed / raw status, plus a numeric limit.
oz_list_models	List the AI model ids available to the account and report the current default. Read‑only.
oz_set_default_model	Set the default Oz model by writing defaultModel into the workspace .warp/warp-bridge.yaml.

The full JSON inputSchema for each tool is emitted verbatim by tools/list. See docs/MCP.md for the protocol details, raw‑curl cheatsheet, and endpoint reference.

---

Endpoints

Route	Method	Purpose
/mcp	POST	Streamable HTTP — a single JSON‑RPC 2.0 request, answered in the same HTTP response. Use this one.
/sse	GET	Legacy (deprecated). Opens the SSE stream. First frame is event: endpoint with the sessionId to POST to.
/messages?sessionId=<uuid>	POST	Legacy (deprecated). A single JSON‑RPC 2.0 request. Acknowledged with 202; the response streams back over /sse.
/health	GET	Returns { ok, name, version, tools, sessions }.

Quick health check:

curl http://127.0.0.1:3847/health

---

Security

• Loopback by default. The server binds to 127.0.0.1; no traffic leaves the machine unless you opt in.
• Non‑loopback requires a token. Binding to anything other than 127.0.0.1 / ::1 without --token / OZ_MCP_TOKEN is refused — the MCP tool surface can spawn the Oz CLI, so an unauthenticated public bind is never allowed.
• Bearer auth covers every route (including /health) when a token is set; comparison is constant‑time.
• No persistence. Prompt content and run output are forwarded to the Oz CLI, never stored by the server.

There is no TLS termination — put the server behind an authenticated reverse proxy if you need HTTPS.

---

Trademarks & disclaimer

OzBridge is an independent project developed by Ivan Sena under the Sena Labs name. It is not affiliated with, endorsed by, sponsored by, or officially associated with Warp, Inc., Microsoft, GitHub, or the Visual Studio Code project.

Warp™ and Oz™ are trademarks of Warp, Inc. These names are used in this project nominatively — solely to describe that OzBridge interoperates with Warp Oz — and not to imply any sponsorship, endorsement, or affiliation.

OzBridge uses only Warp's documented, public interfaces — the oz command‑line tool and the Model Context Protocol transport. It does not modify, reverse‑engineer, embed, or create a derivative work of Warp's software, and it is a complementary integration, not a competing product or service.

This software is provided "as is", without warranty of any kind. Use it at your own risk. See DISCLAIMER.md for the full text.

---

License

MIT © Sena Labs