alterlab-opentrons

Opentrons Integration

Overview

Opentrons is a Python-based lab automation platform for Flex and OT-2 robots. Write Protocol API v2 protocols for liquid handling, control hardware modules (heater-shaker, thermocycler), manage labware, for automated pipetting workflows.

When to Use This Skill

This skill should be used when:

• Writing Opentrons Protocol API v2 protocols in Python
• Automating liquid handling workflows on Flex or OT-2 robots
• Controlling hardware modules (temperature, magnetic, heater-shaker, thermocycler)
• Setting up labware configurations and deck layouts
• Implementing complex pipetting operations (serial dilutions, plate replication, PCR setup)
• Managing tip usage and optimizing protocol efficiency
• Working with multi-channel pipettes for 96-well plate operations
• Simulating and testing protocols before robot execution

Does NOT Trigger

Scenario	Use Instead
One script driving Hamilton/Tecan liquid handlers, plate readers, or mixed vendors	alterlab-pylabrobot
Sending an experiment to a remote cloud lab (Ginkgo Cloud Lab RACs)	alterlab-ginkgo-cloud
Protein expression/binding assays run by Adaptyv Bio's foundry	alterlab-adaptyv
Publishing the written wet-lab protocol with a DOI	alterlab-protocolsio

Core Capabilities

1. Protocol Structure and Metadata

Every Opentrons protocol follows a standard structure:

from opentrons import protocol_api

# Metadata (descriptive only here; apiLevel lives in requirements)
metadata = {
    'protocolName': 'My Protocol',
    'author': 'Name <[email protected]>',
    'description': 'Protocol description',
}

# apiLevel goes in exactly ONE of metadata/requirements: opentrons rejects a protocol
# that sets it in both. robotType is required for Flex protocols.
requirements = {
    'robotType': 'Flex',  # or 'OT-2'
    'apiLevel': '2.22'    # lowest level that has every feature you use (see below)
}

# Run function
def run(protocol: protocol_api.ProtocolContext):
    trash = protocol.load_trash_bin('A3')  # Flex: load a trash bin (or waste chute) before any drop_tip
    # Protocol commands go here

Key elements:

• Import protocol_api from opentrons
• metadata for name/author/description; requirements for robotType + apiLevel
• Implement run() receiving a ProtocolContext; all protocol logic goes inside it
• Flex protocols (API 2.16+) have no fixed trash: call protocol.load_trash_bin(slot) or protocol.load_waste_chute() first, or drop_tip() fails with NoTrashDefinedError

Choosing apiLevel: the latest is 2.29 (Flex robot software 9.1.1+; the opentrons 9.1.x package simulates up to it). Useful floors: 2.16 trash-bin/waste-chute loaders; 2.20 liquid-presence detection; 2.21 Absorbance Plate Reader; 2.22 Labware.load_liquid()/load_empty(); 2.24 liquid classes (transfer_with_liquid_class); 2.25 Flex Stacker; 2.27 concurrent module commands. Use the lowest level that covers your features so older robots can still run the protocol, and check it with opentrons_simulate.

2. Loading Hardware

Loading Instruments (Pipettes):

def run(protocol: protocol_api.ProtocolContext):
    # Load pipette on specific mount
    left_pipette = protocol.load_instrument(
        'flex_1channel_1000',  # Instrument name (Flex convention)
        'left',                # Mount: 'left' or 'right'
        tip_racks=[tip_rack]   # List of tip rack labware objects
    )

Common pipette load names (these are the exact instrument_name strings — do NOT invent p1000_single_flex-style names; Flex uses the flex_<channels>_<volume> convention):

• Flex: flex_1channel_50, flex_1channel_1000, flex_8channel_50, flex_8channel_1000, flex_96channel_1000
• OT-2: p20_single_gen2, p300_single_gen2, p1000_single_gen2, p20_multi_gen2, p300_multi_gen2

Loading Labware:

# Load labware directly on deck
plate = protocol.load_labware(
    'corning_96_wellplate_360ul_flat',  # Labware API name
    'D1',                                # Deck slot (Flex: A1-D3, OT-2: 1-11)
    label='Sample Plate'                 # Optional display label
)

# Load tip rack
tip_rack = protocol.load_labware('opentrons_flex_96_tiprack_1000ul', 'C1')

# Load labware on adapter
adapter = protocol.load_adapter('opentrons_flex_96_tiprack_adapter', 'B1')
tips = adapter.load_labware('opentrons_flex_96_tiprack_200ul')

Loading Modules:

# Temperature module (Flex + OT-2)
temp_module = protocol.load_module('temperature module gen2', 'D3')
temp_plate = temp_module.load_labware('corning_96_wellplate_360ul_flat')

# Heater-Shaker module (Flex + OT-2)
hs_module = protocol.load_module('heaterShakerModuleV1', 'D1')
hs_plate = hs_module.load_labware('corning_96_wellplate_360ul_flat')

# Thermocycler module (takes up specific slots automatically)
tc_module = protocol.load_module('thermocyclerModuleV2')
tc_plate = tc_module.load_labware('nest_96_wellplate_100ul_pcr_full_skirt')

# Magnetic Module (OT-2 ONLY) — an active, motorized module. Flex does not
# support it; on Flex use the unpowered Magnetic Block instead (see below).
mag_module = protocol.load_module('magnetic module gen2', '1')  # OT-2 numeric slot
mag_plate = mag_module.load_labware('nest_96_wellplate_100ul_pcr_full_skirt')

# Magnetic Block (Flex ONLY) — unpowered; labware is moved on/off it with the
# Gripper. There is no engage/disengage; it has no motors.
mag_block = protocol.load_module('magneticBlockV1', 'C2')
block_plate = mag_block.load_labware('nest_96_wellplate_100ul_pcr_full_skirt')

3. Liquid Handling Operations

Basic Operations:

# Pick up tip
pipette.pick_up_tip()

# Aspirate (draw liquid in)
pipette.aspirate(
    volume=100,           # Volume in µL
    location=source['A1'] # Well or location object
)

# Dispense (expel liquid)
pipette.dispense(
    volume=100,
    location=dest['B1']
)

# Drop tip
pipette.drop_tip()

# Return tip to rack
pipette.return_tip()

Complex Operations:

# Transfer (combines pick_up, aspirate, dispense, drop_tip)
pipette.transfer(
    volume=100,
    source=source_plate['A1'],
    dest=dest_plate['B1'],
    new_tip='always'  # 'always', 'once', or 'never'
)

# Distribute (one source to multiple destinations)
pipette.distribute(
    volume=50,
    source=reservoir['A1'],
    dest=[plate['A1'], plate['A2'], plate['A3']],
    new_tip='once'
)

# Consolidate (multiple sources to one destination)
pipette.consolidate(
    volume=50,
    source=[plate['A1'], plate['A2'], plate['A3']],
    dest=reservoir['A1'],
    new_tip='once'
)

Advanced Techniques:

# Mix (aspirate and dispense in same location)
pipette.mix(
    repetitions=3,
    volume=50,
    location=plate['A1']
)

# Air gap (prevent dripping)
pipette.aspirate(100, source['A1'])
pipette.air_gap(20)  # 20µL air gap
pipette.dispense(120, dest['A1'])

# Blow out (expel remaining liquid)
pipette.blow_out(location=dest['A1'].top())

# Touch tip (remove droplets on tip exterior)
pipette.touch_tip(location=plate['A1'])

Flow Rate Control:

# Set flow rates (µL/s)
pipette.flow_rate.aspirate = 150
pipette.flow_rate.dispense = 300
pipette.flow_rate.blow_out = 400

4. Accessing Wells and Locations

Well Access Methods:

# By name
well_a1 = plate['A1']

# By index
first_well = plate.wells()[0]

# All wells
all_wells = plate.wells()  # Returns list

# By rows
rows = plate.rows()  # Returns list of lists
row_a = plate.rows()[0]  # All wells in row A

# By columns
columns = plate.columns()  # Returns list of lists
column_1 = plate.columns()[0]  # All wells in column 1

# Wells by name (dictionary)
wells_dict = plate.wells_by_name()  # {'A1': Well, 'A2': Well, ...}

Location Methods:

# Passing a Well aspirates 1 mm above its bottom by default
pipette.aspirate(100, well)

# top()/bottom() are exact: z=0 is the top rim / the well bottom itself
pipette.dispense(100, well.top())        # at the rim
pipette.aspirate(100, well.top(z=-2))    # 2 mm below the rim
pipette.aspirate(100, well.bottom(z=2))  # 2 mm above the bottom (z=0 would touch it)

# Center of well
pipette.aspirate(100, well.center())

5. Hardware Module Control

Control temperature, magnetic, heater-shaker, thermocycler, and absorbance-reader modules. Each module context exposes its own set / wait / deactivate methods plus status properties (e.g. temp_module.set_temperature, hs_module.set_and_wait_for_shake_speed, tc_module.execute_profile). On Flex, the active Magnetic Module is replaced by the unpowered Magnetic Block (magneticBlockV1).

Full per-module code recipes (Temperature, Magnetic Module vs Flex Magnetic Block, Heater-Shaker, Thermocycler PCR cycling, Absorbance Plate Reader): see references/hardware_modules.md. The corresponding method/property tables are in references/api_reference.md.

6. Liquid Tracking and Labeling

Define Liquids:

# Define liquid types
water = protocol.define_liquid(
    name='Water',
    description='Ultrapure water',
    display_color='#0000FF'  # Hex color code
)

sample = protocol.define_liquid(
    name='Sample',
    description='Cell lysate sample',
    display_color='#FF0000'
)

Load Liquids into Wells (API 2.22+):

# Mark starting contents per labware (volumes in µL)
reservoir.load_liquid(wells=['A1'], volume=50000, liquid=water)
plate.load_liquid(wells=['A1', 'A2'], volume=100, liquid=sample)
plate.load_liquid_by_well({'A3': 50, 'A4': 75}, liquid=sample)

# Mark wells as empty
plate.load_empty(['B1', 'B2'])

Well.load_liquid(liquid, volume) still works but is deprecated from 2.22; there is no Well.load_empty().

7. Protocol Control and Utilities

Execution Control:

# Pause protocol
protocol.pause(msg='Replace tip box and resume')

# Delay
protocol.delay(seconds=60)
protocol.delay(minutes=5)

# Comment (appears in logs)
protocol.comment('Starting serial dilution')

# Home robot
protocol.home()

Conditional Logic:

# Check if simulating
if protocol.is_simulating():
    protocol.comment('Running in simulation mode')
else:
    protocol.comment('Running on actual robot')

Rail Lights (OT-2 and Flex, API 2.5+):

# Turn lights on
protocol.set_rail_lights(on=True)

# Turn lights off
protocol.set_rail_lights(on=False)

8. Multi-Channel and 8-Channel Pipetting

When using multi-channel pipettes:

# Load 8-channel pipette
multi_pipette = protocol.load_instrument(
    'p300_multi_gen2',
    'left',
    tip_racks=[tips]
)

# Access entire column with single well reference
multi_pipette.transfer(
    volume=100,
    source=source_plate['A1'],  # Accesses entire column 1
    dest=dest_plate['A1']       # Dispenses to entire column 1
)

# Column-wise with an 8-channel: target the row-A well of each column
for column_top in plate.rows()[0]:        # A1, A2, ... A12
    multi_pipette.transfer(100, reservoir['A1'], column_top)

With an 8-channel pipette, address row A wells only; targeting B1–H1 would put the other nozzles off the plate.

9. Common Protocol Patterns

Reusable end-to-end templates cover the most common workflows: serial dilution (diluent fill plus mix-after cascade across a row), plate replication (whole-plate wells()-to-wells() copy), and PCR setup (master-mix distribute, per-sample transfer, thermocycler cycling).

Full worked-example protocols for each pattern: see references/protocol_patterns.md. Runnable .py versions are in the scripts/ directory (serial_dilution_template.py, basic_protocol_template.py, pcr_setup_template.py).

Best Practices

1. Always specify API level: Pin the lowest apiLevel that covers the features you use and that your robot's software accepts (confirm with opentrons_simulate)
2. Use meaningful labels: Label labware for easier identification in logs
3. Check tip availability: Ensure sufficient tips for protocol completion
4. Add comments: Use protocol.comment() for debugging and logging
5. Simulate first: Always test protocols in simulation before running on robot
6. Handle errors gracefully: Add pauses for manual intervention when needed
7. Consider timing: Use delays when protocols require incubation periods
8. Track liquids: Use liquid tracking for better setup validation
9. Optimize tip usage: Use new_tip='once' when appropriate to save tips
10. Control flow rates: Adjust flow rates for viscous or volatile liquids

Troubleshooting

Common Issues:

• Out of tips: Verify tip rack capacity matches protocol requirements
• Labware collisions: Check deck layout for spatial conflicts
• Volume errors: Ensure volumes don't exceed well or pipette capacities
• Module not responding: Verify module is properly connected and firmware is updated
• Inaccurate volumes: Calibrate pipettes and check for air bubbles
• Protocol fails in simulation: Check API version compatibility and labware definitions

Resources

For detailed API documentation, see references/api_reference.md in this skill directory.

For example protocol templates, see scripts/ directory.

Part of the AlterLab Academic Skills suite.