arduino-workflow-router

Arduino Workflow Router

Use this skill as the concise entrypoint for complete or cross-discipline embedded work. For a focused task with a confirmed board and one stage, load the specialist skill directly.

Recommended lifecycle entry

For any physical or multi-session request, load embedded-project-loop first. It establishes the goal, one next action, evidence boundary, rollback path, and user-owned physical gate. Then return here for board and toolchain routing.

Load First

1. Read ../../docs/arduino-skill-contract.md.
2. If the work spans sessions or physical actions, embedded-project-loop is the recommended first skill; create its goal/next-todo state before implementation and keep it open until the evidence gate is satisfied.
3. Fill ../../docs/board-support/board-profile-template.md or state why it is unnecessary.
4. When a named board or board family must be resolved, load ../board-support/SKILL.md and its indexed profile before selecting pins.
5. Read references/board-intake.md for board and hardware checks.
6. Read references/toolchain-selection.md for IDE, CLI, PlatformIO, or vendor version and library compatibility.
7. Select specialist skills from the routing table below.
8. Read references/failure-recovery.md before upload, boot, power, or firmware recovery actions; read references/connected-device-security.md for any networked or updateable device.

This is the load-first order. Load on demand: references are loaded only when their trigger applies, so the router stays under 500 lines and detailed variants remain progressive disclosure.

Trigger precedence

• For combined, underspecified, or cross-discipline requests, this router owns the first route. Load it before any overlapping specialist, including arduino-project-builder or board-selection.
• For physical or multi-session requests, load embedded-project-loop before this router, then return to this router for the combined specialist route.
• For a single-stage request with a confirmed board and toolchain, load the narrowest specialist directly.
• For a named-board reference or capability lookup, board-support owns the exact identity and source-backed profile. board-selection owns choosing or replacing a board from requirements and may consume its handoff.
• A board-choice request without implementation, wiring, or lifecycle work may start at board-selection; once another discipline appears, return to this router and preserve the combined-workflow order.
• Do not load both arduino-serial-monitor and a second serial-debugging skill; the existing serial monitor owns structured runtime evidence.

Intake Gate

Do not invent a pin, voltage, current limit, memory size, peripheral, protocol, library version, or upload command. Ask for the missing value or proceed with a clearly labeled assumption and a verification step. Record the exact board, framework, toolchain, host, dependency versions, and desired proof stage.

Routing Table

Need	Load next	Evidence focus
Requirements or board choice	board-selection, then board-support, then arduino-project-builder	decision and design
Named board reference or capability lookup	board-support, then the relevant specialist	exact identity and source-backed constraints
Pin map or GPIO declarations	board-support, then pin-assignment, then wiring-safety-check	board constraints and hardware
Wiring, voltage, current, or pull-ups	wiring-safety-check, power-budget-calculator, circuit-debugger	hardware
ADC/sensor noise, sampling, filtering, or signal conditioning	board-support, wiring-safety-check, sensor-signal-filtering, then sensor-calibration-workbench after detection is proven	signal-chain design and measured hardware behavior
Code pattern or board abstraction	arduino-code-generator, non-blocking-patterns, memory-budgeting	build and memory
Library or framework dependency	library-selection, then the code/project skill	compatibility and memory
Datasheet, component, or protocol uncertainty	datasheet-interpreter, i2c-bringup-diagnostician	hardware assumptions
Compile, board discovery, upload, or port	arduino-cli-skill plus error-message-explainer	build and upload
Runtime logs or field symptoms	arduino-serial-monitor, error-message-explainer, hardware-tdd	hardware and system
Timing, blocking, or watchdog risk	non-blocking-patterns, hardware-tdd	build and system
Memory or footprint risk	memory-budgeting, library-selection	build and runtime
Calibration or sensor drift	sensor-calibration-workbench after detection is proven	system
Complete application	arduino-project-builder, then the relevant domain skills	design and build
Connected update or field deployment	ota-deployment-guardian plus the security reference	deployment
Parts, PCB-adjacent, or enclosure work	bom-generator, enclosure-designer, readme-generator	design and maintenance
Host/simulation/target test plan	hardware-tdd and embedded-project-loop when physical work is pending	evidence
Multi-session, physical, or recovery work	embedded-project-loop first, then this router	durable state and user-owned gate

Combined Workflows

Skills can be used together. Keep one owner for each decision and pass its artifacts to the next skill. For a combined request, use this concise default order:

loop (if long-running) -> board selection/intake -> wiring safety -> library/memory -> project/code/timing -> toolchain build/upload -> serial and hardware tests -> system/calibration -> deployment/security/maintenance

Default combined order: arduino-workflow-router -> board-selection -> board-support -> pin-assignment -> wiring-safety-check -> sensor-signal-filtering -> non-blocking-patterns -> arduino-serial-monitor -> hardware-tdd. Start with embedded-project-loop when the work spans sessions or physical gates, then keep its next-todo and evidence ledger open through the later stages.

If the user already supplied an exact, supported board identity, skip board-selection and begin with board-support; never skip board-support before pin or electrical advice.

• Battery-powered Wi-Fi sensor: board intake -> datasheet -> power -> project builder -> code generator -> toolchain -> serial/calibration -> OTA security -> maintenance README.
• Uno R4 WiFi upload incident: board-family reference -> IDE/CLI discovery -> serial and error diagnosis -> USB/power checks -> boot recovery -> upload proof -> runtime/system proof. See ../../docs/board-support/uno-r4-family.md.
• Robot controller: board intake -> project builder -> power/BOM -> circuit and code -> serial/system tests -> enclosure -> signed update and rollback.
• Multi-board sensor library: board profiles -> datasheets/protocol bringup -> code generator -> IDE/CLI/PlatformIO branches -> per-board build proof and documented unsupported behavior.
• Four-button ESP32 controller: board selection -> pin assignment -> wiring safety -> non-blocking debounce -> code generator -> build proof -> hardware gate -> serial/system evidence.

Do not treat a table row as proof that a skill was run. Report which skills were actually used, which artifacts they produced, and which evidence stages remain unverified.

Output Contract

Use ../../docs/arduino-skill-contract.md: state assumptions, required tools and versions, implementation steps, tests/evidence by proof stage, known limitations, and recovery/security notes.