mcpField
B
bambu-labs

bambu-labs

github.com/earthtojakeOther23.9k9.5k installsUpdated today
Repository

About bambu-labs

bambu-labs is a skill for handing 3D print files to Bambu Connect or opening unsliced models in Bambu Studio. It leaves printer selection and starting the job to the user and does not control or read printer state.

Key features

  1. 01Open sliced files in Bambu Connect
  2. 02Open unsliced models in Bambu Studio
  3. 03Select handoff based on file type
  4. 04Keep print initiation under user control

Use cases

  1. 01Hand off a sliced `.gcode.3mf` file
  2. 02Open a printer-profile `.gcode` file
  3. 03Prepare an unsliced `.3mf`, `.stl`, or `.step` model

Install

Copy the command and run it in a terminal.

$npx skills add https://github.com/earthtojake/text-to-cad --skill bambu-labs

After installing, type/bambu-labsin Claude Code to confirm it loaded.

Bundled filesagents/openai.yamlLICENSE

Details

From the project README

Bambu Labs

Provenance: maintained in earthtojake/text-to-cad. Use the installed local skill files as the runtime source of truth; the repository link is only for provenance and release review.

Bambu Lab printers take print jobs from other software only through Bambu Connect, Bambu Lab's desktop app for third-party tools (https://wiki.bambulab.com/en/software/third-party-integration). This skill opens a file in Bambu Connect, or an unsliced model in Bambu Studio; the user picks the printer and starts the print there. The agent never controls a printer and never asks for access codes.

Requirements

Bambu Connect (Windows 10 or later, macOS 13 or later), signed in to the user's Bambu Lab account, with the printer on that account or reachable in LAN mode (https://wiki.bambulab.com/en/software/bambu-connect). On Linux, where Bambu Connect is still in development, use Bambu Studio.

Choose the handoff

What the user hasHandoff
A sliced .gcode.3mf, from $gcode or Bambu Studio's or OrcaSlicer's "Export plate sliced file"Open it in Bambu Connect
A plain .gcode sliced with this printer's Bambu profileOpen it in Bambu Connect; if Bambu Connect refuses it, slice the model in Bambu Studio instead
A model with no slice: .3mf, .stl or .stepOpen it in Bambu Studio, which slices it and sends it to the printer itself

Open a file in Bambu Connect

Bambu Connect imports a file from a bambu-connect://import-file link with three parameters: path, the file's absolute path, and name, the name to show, each percent-encoded the way JavaScript's encodeURIComponent does it (Python: urllib.parse.quote(value, safe="")); and version=1.0.0. For /Users/me/prints/bracket.gcode.3mf:

bambu-connect://import-file?path=%2FUsers%2Fme%2Fprints%2Fbracket.gcode.3mf&name=bracket&version=1.0.0

Open the link with open "<link>" on macOS, or Start-Process "<link>" in PowerShell on Windows. Bambu Connect comes forward with the file loaded.

Open a model in Bambu Studio

On macOS run open -a BambuStudio <file> (some installs name the app Bambu Studio). On Windows open the file from Bambu Studio's File menu, or run Start-Process <file> when Bambu Studio is the file's default app. On Linux run bambu-studio <file>, or open it from the AppImage or Flatpak.

Finish in the app

Before the user presses Print, tell them what to check: the printer, plate type, nozzle, filament and AMS mapping, a clear build plate, and someone nearby for the first layer. Never report a print as started: the agent can't see the printer, and the app shows the job and its progress.

Out of scope

Starting, pausing or cancelling prints without the user, and reading printer status: Bambu Lab's firmware takes those from other software only through Bambu Connect, or in Developer Mode, which is LAN-only and disconnects the printer from Bambu Cloud. For slicing, use $gcode or Bambu Studio.

Comments

Markdown supported