mcpField
R
radio-sdr

radio-sdr

github.com/zhaoxuya520Security43.7k1.1k installsUpdated 5w ago
Repository

About radio-sdr

A skill for authorized RF and SDR security research, guiding signal identification, demodulation, and lab assessment within documented legal and test boundaries. It defaults to receive-only work and prohibits interference or unauthorized transmission.

Key features

  1. 01Check legal permissions and test scope
  2. 02Identify center frequency and modulation
  3. 03Analyze signals with GNU Radio and URH
  4. 04Assess replay only in an authorized shielded lab

Use cases

  1. 01Research wireless remote or sensor signals
  2. 02Legally receive and analyze protocols such as ADS-B
  3. 03Assess unauthorized-control risks and recommend hardening

Install

Copy the command and run it in a terminal.

$npx skills add https://github.com/zhaoxuya520/reverse-skill --skill radio-sdr

After installing, type/radio-sdrin Claude Code to confirm it loaded.

Bundled filesreferences/sdr-lab-rules.md

Details

From the project README

RF / SDR Security Research

ACTION REQUIRED（读完后立刻执行）

  1. NOW: 频谱与发射受法律严格管制；仅授权频段/屏蔽室/实验目标
  2. NOW: scope 写明设备、频段、是否允许发射（默认只收）
  3. ACT: 只接收识别 → 解调分析 → 实验室复现评估

适用场景

  • 无线遥控/传感器等非 Wi-Fi RF（授权）
  • ADS-B/遥控等协议研究（合法接收）
  • 与 wifi-wireless 分工：本 skill 偏 SDR 通用 RF；Wi-Fi 攻防走 R29

工作流

□ 法规与许可确认
□ 只收：识别中心频率与调制
□ GNU Radio / URH 分析
□ 重放仅屏蔽室且书面允许
□ 结论侧重：是否可未授权控制 / 加固建议

工具链

工具用途
RTL-SDR / HackRF（合规）收发硬件
URH / GNU Radio分析
Inspectrum信号

参考

  • references/sdr-lab-rules.md
  • ../wifi-wireless/ ../ot-ics/ ../hardware-security/

路由上下文

上游: MASTER R38
MUST NOT: 干扰公共通信、未授权发射

任务完成自检

  • 是否默认只收并记录法规边界？
  • Checklist？

Comments

Markdown supported