aliyun-sls-openclaw-integration

OpenClaw SLS 集成

此技能为 Linux 上的 OpenClaw 配置 Alibaba Cloud SLS 可观测性，并确保重复运行安全。

整体执行流程如下：

1. 检查并安装 aliyun CLI（缺失时安装最新版）
2. 根据项目所在地域安装 LoongCollector（如果已在运行，则跳过）
3. 创建基于标识符的机器组（本地标识符 + 云端机器组）
4. 创建 logstore 索引和仪表板
5. 创建 logstore 采集配置
6. 将采集配置绑定到机器组

---

执行前确认意图

运行命令前，确保用户意图完整：

1. 确认目标 PROJECT 和 LOGSTORE。
2. 确认可以访问 Linux 主机，且可使用 sudo。
3. 确认 AK/SK 已导出为环境变量。
4. 如果缺少任何必需输入，先询问用户，不要执行部分配置。

---

前置条件

必需项：

• PROJECT：SLS 项目名称
• LOGSTORE：SLS logstore 名称

从环境变量读取：

• ALIBABACLOUD_ACCESS_KEY_ID
• ALIBABACLOUD_ACCESS_KEY_SECRET
• ALIYUN_UID（用于 /etc/ilogtail/users 下的本地 UID 文件）

建议的可选项：

• ALIBABACLOUD_REGION_ID（未设置时根据 PROJECT 自动解析）

如果使用不同的 AK/SK 变量名，请先将它们导出为这些标准名称。

---

预期结果

成功执行后，环境中应包含：

• 主机上正在运行的 LoongCollector（或 ilogtaild）
• 机器组 openclaw-sls-collector
• 在目标 LOGSTORE 上创建的索引
• 仪表板 openclaw-audit 和 openclaw-gateway
• 采集配置 openclaw-audit_${LOGSTORE}
• openclaw-audit_${LOGSTORE} 与 openclaw-sls-collector 之间的配置绑定

---

一次性执行流程（幂等）

以下命令采用“已存在 -> 跳过”的设计，可安全重复运行。 严格模板模式：对于索引、配置和仪表板负载，始终从 references/ 中的文件读取。 除替换必需占位符外，不要手工编写或简化 JSON 请求体。

set -euo pipefail

# ===== User inputs =====
: "${PROJECT:?Please export PROJECT}"
: "${LOGSTORE:?Please export LOGSTORE}"
: "${ALIBABACLOUD_ACCESS_KEY_ID:?Please export ALIBABACLOUD_ACCESS_KEY_ID}"
: "${ALIBABACLOUD_ACCESS_KEY_SECRET:?Please export ALIBABACLOUD_ACCESS_KEY_SECRET}"
: "${ALIYUN_UID:?Please export ALIYUN_UID}"

MACHINE_GROUP="openclaw-sls-collector"
CONFIG_NAME="openclaw-audit_${LOGSTORE}"

# 1) Install aliyun CLI if missing (Linux)
if ! command -v aliyun >/dev/null 2>&1; then
  if command -v apt-get >/dev/null 2>&1; then
    sudo apt-get update
    sudo apt-get install -y aliyun-cli
  elif command -v dnf >/dev/null 2>&1; then
    sudo dnf install -y aliyun-cli
  elif command -v yum >/dev/null 2>&1; then
    sudo yum install -y aliyun-cli
  elif command -v zypper >/dev/null 2>&1; then
    sudo zypper -n install aliyun-cli
  else
    echo "aliyun CLI not found. Install aliyun-cli manually for your Linux distribution." >&2
    exit 1
  fi
fi

# Export auth variables for aliyun CLI
export ALIBABACLOUD_ACCESS_KEY_ID
export ALIBABACLOUD_ACCESS_KEY_SECRET

is_loong_running() {
  if sudo /etc/init.d/loongcollectord status 2>/dev/null | grep -qi "running"; then
    return 0
  fi
  if sudo /etc/init.d/ilogtaild status 2>/dev/null | grep -qi "running"; then
    return 0
  fi
  return 1
}

# 2) Resolve region and install LoongCollector (skip when already running)
REGION_ID="${ALIBABACLOUD_REGION_ID:-}"
if [ -z "$REGION_ID" ]; then
  REGION_ID="$(aliyun sls GetProject --project "$PROJECT" --cli-query 'region' --quiet 2>/dev/null | tr -d '\"' || true)"
fi
if [ -z "$REGION_ID" ]; then
  echo "Cannot resolve region from project: $PROJECT. Please set ALIBABACLOUD_REGION_ID." >&2
  exit 1
fi

if ! is_loong_running; then
  wget "https://aliyun-observability-release-${REGION_ID}.oss-${REGION_ID}.aliyuncs.com/loongcollector/linux64/latest/loongcollector.sh" -O loongcollector.sh
  chmod +x loongcollector.sh
  ./loongcollector.sh install "${REGION_ID}"
fi

# Post-install verification: one of loongcollectord/ilogtaild must be running.
if ! is_loong_running; then
  sudo /etc/init.d/loongcollectord start >/dev/null 2>&1 || true
  sudo /etc/init.d/ilogtaild start >/dev/null 2>&1 || true
fi
if ! is_loong_running; then
  echo "LoongCollector installation check failed: neither loongcollectord nor ilogtaild is running." >&2
  exit 1
fi

# 3) Local user-defined identifier + create machine group
sudo mkdir -p /etc/ilogtail
sudo mkdir -p /etc/ilogtail/users
if [ ! -f /etc/ilogtail/user_defined_id ]; then
  sudo touch /etc/ilogtail/user_defined_id
fi
RAND8="$(LC_ALL=C tr -dc 'a-z0-9' </dev/urandom | head -c 8)"
USER_DEFINED_ID_PREFIX="${PROJECT}_openclaw_sls_collector_"
EXISTING_USER_DEFINED_ID="$(sudo awk -v p="${USER_DEFINED_ID_PREFIX}" 'index($0,p)==1 {print; exit}' /etc/ilogtail/user_defined_id 2>/dev/null || true)"
if [ -n "${EXISTING_USER_DEFINED_ID}" ]; then
  USER_DEFINED_ID="${EXISTING_USER_DEFINED_ID}"
else
  USER_DEFINED_ID="${USER_DEFINED_ID_PREFIX}${RAND8}"
  echo "${USER_DEFINED_ID}" | sudo tee -a /etc/ilogtail/user_defined_id >/dev/null
fi
if ! sudo grep -Fxq "${USER_DEFINED_ID}" /etc/ilogtail/user_defined_id 2>/dev/null; then
  echo "Failed to persist USER_DEFINED_ID to /etc/ilogtail/user_defined_id" >&2
  exit 1
fi
if [ ! -f "/etc/ilogtail/users/${ALIYUN_UID}" ]; then
  sudo touch "/etc/ilogtail/users/${ALIYUN_UID}"
fi
if [ ! -f "/etc/ilogtail/users/${ALIYUN_UID}" ]; then
  echo "Failed to create UID marker file: /etc/ilogtail/users/${ALIYUN_UID}" >&2
  exit 1
fi

if ! aliyun sls GetMachineGroup --project "$PROJECT" --machineGroup "$MACHINE_GROUP" >/dev/null 2>&1; then
  cat > /tmp/openclaw-machine-group.json <<EOF
{
  "groupName": "${MACHINE_GROUP}",
  "groupType": "",
  "machineIdentifyType": "userdefined",
  "machineList": ["${USER_DEFINED_ID}"]
}
EOF
  aliyun sls CreateMachineGroup \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-machine-group.json)"
fi
if ! aliyun sls GetMachineGroup --project "$PROJECT" --machineGroup "$MACHINE_GROUP" >/dev/null 2>&1; then
  echo "Machine group was not created successfully: ${MACHINE_GROUP}" >&2
  exit 1
fi

# 4) Create logstore (if missing) + index + multiple dashboards
if ! aliyun sls GetLogStore --project "$PROJECT" --logstore "$LOGSTORE" >/dev/null 2>&1; then
  aliyun sls CreateLogStore --project "$PROJECT" \
    --body "{\"logstoreName\":\"${LOGSTORE}\",\"ttl\":30,\"shardCount\":2}"
fi

if ! aliyun sls GetIndex --project "$PROJECT" --logstore "$LOGSTORE" >/dev/null 2>&1; then
  # Use the index template as-is from references/index.json
  aliyun sls CreateIndex \
    --project "$PROJECT" \
    --logstore "$LOGSTORE" \
    --body "$(cat references/index.json)"
fi

sed "s/\${logstoreName}/${LOGSTORE}/g" references/dashboard-audit.json > /tmp/openclaw-audit-dashboard.json
sed "s/\${logstoreName}/${LOGSTORE}/g" references/dashboard-gateway.json > /tmp/openclaw-gateway-dashboard.json

# Create dashboard uses project + body(detail). Update uses path + project + body.
if aliyun sls GET "/dashboards/openclaw-audit" --project "$PROJECT" >/dev/null 2>&1; then
  aliyun sls PUT "/dashboards/openclaw-audit" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-audit-dashboard.json)"
else
  aliyun sls POST "/dashboards" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-audit-dashboard.json)"
fi

if aliyun sls GET "/dashboards/openclaw-gateway" --project "$PROJECT" >/dev/null 2>&1; then
  aliyun sls PUT "/dashboards/openclaw-gateway" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-gateway-dashboard.json)"
else
  aliyun sls POST "/dashboards" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-gateway-dashboard.json)"
fi

# 5) Create collection config (update when already exists)
# Render collector config strictly from references/collector-config.json
sed \
  -e "s/\${configName}/${CONFIG_NAME}/g" \
  -e "s/\${logstoreName}/${LOGSTORE}/g" \
  -e "s/\${region_id}/${REGION_ID}/g" \
  references/collector-config.json > /tmp/openclaw-collector-config.json

if aliyun sls GetConfig --project "$PROJECT" --configName "$CONFIG_NAME" >/dev/null 2>&1; then
  aliyun sls UpdateConfig \
    --project "$PROJECT" \
    --configName "$CONFIG_NAME" \
    --body "$(cat /tmp/openclaw-collector-config.json)"
else
  aliyun sls CreateConfig \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-collector-config.json)"
fi

# 6) Bind collection config to machine group
aliyun sls ApplyConfigToMachineGroup \
  --project "$PROJECT" \
  --machineGroup "$MACHINE_GROUP" \
  --configName "$CONFIG_NAME"

echo "OpenClaw SLS observability setup completed."

---

回复格式

此技能执行完成后，返回简洁的状态报告，包含：

1. 使用的输入：PROJECT、LOGSTORE、解析出的 REGION_ID
2. 已创建/更新的资源（机器组、索引、仪表板、配置、绑定）
3. 跳过的步骤（已存在 / 已在运行）
4. 提供给用户的下一步验证命令

---

验证命令

aliyun sls GetMachineGroup --project "$PROJECT" --machineGroup openclaw-sls-collector
aliyun sls GetIndex --project "$PROJECT" --logstore "$LOGSTORE"
aliyun sls GetDashboard --project "$PROJECT" --dashboardName openclaw-audit
aliyun sls GetDashboard --project "$PROJECT" --dashboardName openclaw-gateway
aliyun sls GetConfig --project "$PROJECT" --configName "openclaw-audit_${LOGSTORE}"

---

参考文件

• 命令流程：references/cli-commands.md
• 索引定义：references/index.json
• 仪表板模板：references/dashboard-audit.json、references/dashboard-gateway.json
• 采集配置模板：references/collector-config.json

仅在需要时读取参考文件：

• 使用 cli-commands.md 进行逐步故障排除。
• 创建/更新资源时使用 JSON 模板。